ads

What are the top tips on how can I repair concrete sidewalk cracks?

Not only broken sidewalk is a tripping hazard for pedestrians, but also cracks in your concrete patio, driveway, or walkway can really compromise the curb appeal of your property. Since concrete sidewalk repair is the requirement of every property owner, multiple methods and options have been devised to counter the ever-growing demand for sidewalk repair NYC services.

For which, today, minor-level crack fixing and sidewalk repairing remain easily achievable through DIY means! Here are top tips on how you can perform concrete sidewalk repair cracks.

Materials and Tools Required.

Here are some of the common materials and tools that you would require for your DIY sidewalk repair procedures. All of this equipment can easily be bought or rented from a local construction supplies store.

• Concrete repair/patching mix or ready to use concrete sealants/caulks.
• A Hammer and chisel for cutting out the broken edges of the concrete sidewalk.
• Wire brush for cleaning purposes.
• Mason’s trowel for leveling, spreading, and shaping of concrete.
• Putty knife for scraping residue.
• Protective gear for personal safety.

Repairing the sidewalk.

1. Choose your concrete repairing product.

First of all, choose your sidewalk repairing product. Since concrete surfaces cannot be repaired with concrete alone; use a concrete repair mix, readily available at home centers as well as online. Other options include latex patching material, epoxy compounds, and mortar mixes.

Mortar mixes are best recommended for filing up large cracks or chipped edges of a sidewalk, while the other products are suitable for cracks in concrete that are 1/8 inch wide or narrower.

2. Prepare the cracked surface for renovation.

Wearing your personal safety equipment i.e. safety goggles, gloves, helmet, and a mask, use a small hammer and chisel in combination to knock away any part of cracked, crumbling, or loose sidewalk concrete. Chip to a depth of almost about an inch below the surface plane. Afterward, rinse the area thoroughly using a wire brush to dislodge any loose or lingering debris that may hinder the efficiency of the sealant.

3. Apply the sealant.

Once the surface to be renovated gets prepared, fix the concrete using your desired sealant.
Epoxy/Latex; For concrete cracks that are 1/8-inch-wide or narrower – apply an epoxy or latex patching product (mixed according to the manufacturer’s specifications). The material prepared can either be applied with a mason’s trowel or even a putty knife. Keep in mind that you have to force it all the way into the crack and then smooth the product level with the surrounding concrete for the best results. Let it dry.

Concrete Mix; Moisten the problematic area and then apply the mortar mix. As you proceed, take pains to eliminate any entrapped air pockets by pressing down firmly on the applied product. Finally, smoothen the patch evenly so that it’s leveled with the surrounding concrete. Let it cure.

That’s how you can easily and efficiently patch concrete cracks, holes, and splitting in your sidewalk by yourself.

Post a Comment

0 Comments